Physical Testing Machines
MODEL NO : FRET
• Test loads- 15, 30, 45 kgf for superficial scale and 60, 100, 150 kgf for Rockwell ABC scale
• Digital Display with 0.1 Rockwell resolution.
• Loading/Unloading, Cycle automatic by a push button operation.
• Optional - Printer facility.
MODEL NO : RASN (E)
• Test Loads - 60, 100, 150 kgf for test on Rockwell A,B,C scale.
• Loading/Unloading, Cycle automatic by a push button operation.
• Raising/Loaring of elevating spindle - manual.
• Electronic Digital Readout with 0.1 Rockwell resolution.
• Go-nogo facility with presentable and higher limits.
• Optional - printer facility
• Capacity - Throat - 133mm, Max test - 230 mm
MODEL NO : RASN
• Test Loads - 60, 100, 150 kgf for test on Rockwell A,B,C scale.
• Automatic zero setting dial gauge.
• Load Selection just by a dialing externally.
• Capacity - Throat - 133mm, Max test - 230 mm
• Conform to IS: 3804, BS: 891 & ASTM: E - 18
MODEL NO : MVM-50
• Testing range is very wide from soft metal such as lead up to hardest like hardened steel.
• Same hardness number is obtained on the same specimen, regardless of the load applied.
• The indentation is tiny and allows testing of a precision finished part.
• Loading & Unloading cycle is motorised.
• Thin sheet metal is perfectly tested because the load applied is very small.
• Built-in projection screen to get accurate results.
• Test Loads- 5, 10, 20, 30 and 50 kgf.
• Optional magnification - 70 X scale least count 0.001mm.
• Capacity - Throat - 135mm, Max test - 200 mm
MODEL NO : RAS
• Test Loads - 60, 100, 150 kgf for test on Rockwell A,B,C scale.
• Automatic zero setting dial gauge.
• Load Selection just by a dialing externally.
• Capacity - Throat - 133mm, Max test - 230 mm
• Conform to IS: 3804, BS: 891 & ASTM: E - 18
MODEL NO : RAB-250
• Test Loads - 60, 100, 150 kgf for Rockwell test and 187.5 and 250 kgf. for Brinell tests.
• Automatic zero setting dial gauge.
• Load Selection just by a dialing externally.
• Capacity - Throat - 150mm, Max test height - 295 mm
• Conform to IS: 3804, BS: 891 & ASTM: E - 18 for Brinell tests.
MODEL NO : TWIN
• Test Loads - 60, 100, 150 kgf for Rockwell test and 15, 30 and 45 kgf. for Rockwell superficial tests.
• Automatic zero setting dial gauge.
• Capacity - Throat - 150mm, Max test height - 295 mm
• Conform to IS: 3804, BS: 891 & ASTM: E - 18 for Rockwell tests and IS: 5073, ASTM: E18 for Rockwell superficial tests.
MODEL NO : B3000(H)
• Test loads 500 to 3000 kgf. in steps of 250 kgf.
• Capacity - Throat 200mm. Max test height 410mm.
• Hydraulic power pack and control circuit for effortless loading/unloading operations.
• Facilitates production testing within tolerance limits as set on dial gauge.
• Conform to IS: 2281, BS: 240 & ASTM:E10
MODEL NO : B3000(O)
• Test loads 500 to 3000 kgf. in steps of 250 kgf.
• Capacity - Throat 200mm. Max test height 380mm.
• Hydraulic power pack and control circuit for effortless loading/unloading operations.
• Built-in optical system with 14 X magnification.
• Dia of impression measured under test position with an accuracy 0.1mm
• Conform to IS: 2281, BS: 240 & ASTM:E10